UVC Dosimeters give you visible evidence that your device is actually emitting germicidal UV-C. UVC Dosimeters let you see when you’ve delivered a target dose to a variety of surfaces around a room or on objects within a disinfection room UVC Dosimeters enable you to demonstrate where UV-C irradiation is extending so you can avoid unintended exposure to room occupants.
R-Zero’s Arc, Beam, and Vive should me measured at levels not exceeding 254nm, 260nm, and 222nm respectively. Therefore, when testing the wavelength of each device it is important to utilize the correct dosimeter card.
To use, peel off the protective strip to expose the adhesive and place the dosimeter on or adjacent to any equipment or surface that will be disinfected with ultraviolet germicidal irradiation. Make sure the yellow indicator area faces toward the UV-C light source.
After the disinfection cycle is complete, the color change allows you to see if you’ve reached 25, 50 to 100 mJ/cm².
UVC Dosimeters are intended for one use only and should not be reused. Store at room temperature and away from direct sunlight.